Imer Step-UP 120 Spray & Grout Pump

9681 Imer Step-UP 120 Spray & Grout Pump - $17,899.00 Step-UP 120 Spray & Grout Pump Free shipping from IMER factory warehouse The Step-Up 120 is the bigger brother of the famous Mighty Small 50 Spray and Grout Pump. The Step-Up 120 is designed for the applications that need to be pumped and sprayed with more flow and pressure. A built in vertical shaft mixer sits atop the Step-Up 120 and discharges right into the pump for an easy and practical way to fill the hopper. The 220v 2 h.p. motor and gearbox variation of our Mortarman 120 is ideal to handle the mixing, as it will mix just about any material perfectly. As the mixer is powered by inverter technology it also runs in reverse, which is very helpful when material needs to be broken up.Use almost any material with aggregate no bigger than 3/8".

Mix and pump at the same time
The Step-Up 120 comes standard with an IM25L stator which can handle up to 3/8 inch aggregate and produce up to 6.6 GPM and 450 PSI of pumping pressure. The Step-Up 120 is made to be towed on the road but also able to pass through 36" doorways. A dual diaphragm maintenance free compressor is used to provide the air flow for spraying applications. Step-Up 120 Features.

• The Step-Up's rotor/stator is turned by a 3 HP, 220 volt single phase motor using inverter technology. The inverter provides smooth and continuous power even when the electrical source is not ideal. The inverter also aides in starting and controlling the frequency at which the pump operates. This allows the RPM's to range between 30 and 100, enabling the Step-Up 120 to be used for numerous applications and materials.
• The Step-Up 120 is designed to be an all in one unit with optimum mixer output delivering material into the hopper. It is easy to setup and easy to operate, and does not require special electrical connections or an electrician to hook it up. All the motors combined are just under six horsepower and can operate on 16 Amps of 220 Volt single phase power. Competitor’s pumps with similar output require either three phase power or 72 Amps of single phase.
• Small, light, easy to own and operate and able to handle 3/8" aggregate, the Step-Up 120 is the number one solution for your pumping and spraying needs.

  Model

  IMER Step 120

  
  

Voltage/phase
220/single phase
Pump motor HP
3 HP
Compressor flow rate
9 CFM
Compressor HP
1 HP
Screw pump RPM (IM25L)
Variable from 30 - 100
Max aggregate size (IM25L)
3/8"
Max Flow Rate
6.6/0.9 GPM/cf
Max Pumping Distance.
130 - 250 ft. material viscosity dependent.
Material flow rate
6.6/0.9 GPM/cf
Hopper Capacity
4.2 cf (31 gallons)
Mixer Capacity
4.2 cf (31 gallons)
Mixer Motor
2 hp
Weight
870 lbs
Dimensions LxWxH
80.3"x32.2"x50.2"
Shipping FREE
Freight Truck

Multipurpose Pumping, Spraying Mixing Machines

7695 Imer Small 50 Pumping, Spraying & Mixing Machines - $5,499.00 Imer Small 50 Multipurpose Pumping, Spraying Mixing Machines Free shipping from IMER factory warehouse Use with all types of finish coatings. Quickly and easily apply materials such as plasters, mortars, stucco (cement and synthetic based) fire proofing, sound proofing and paint. Pump grout to fill blocks, metal door bucks, self leveling materials, epoxy, almost any material with aggregate no bigger than 1/4".

The pump is controlled by the operator either with the 5 volt remote start/stop or, when used with the optional diaphragm compressor, is controlled with the open and closing of the valve at the gun. A rheostat controls the motor RPM which means that you have total control of the flow to match with the material being applied. All of the operation is controlled by the panel which can detect the wrong voltage and shut down as a safety. The unit will sense a jamb and cut the power to the pump. Thermal overloads are in place on the 100% duty cycle motor. This means that the motor can run all day, every day. The control panel will sense an overload before the thermal protection on the motor. This is just the level of how safe, secure and sophisticated this machine is.The optional compressor is needed when used for spraying applications. The oil-less, continuous flow, low PSI high CFM compressor is the lungs of the unit. The pumping action is all on the operator. With the air valve closed the compressor senses back pressure and turns off the compressor and the pump motor. When the valve is re-opened the compressor and the pump kick on again to start where you left off.There are 2 different nozzles for spraying. One is for heavy materials that needs to be built up such as fire proofing materials and mortars. The other nozzle is used for spraying of thinner coats such as acrylic stucco and coatings. This nozzle comes with different orifice sizes and when used without the compressor, makes a great tool for pointing, filling in cracks and joints in between stone walls.Small 50 Features.

• Stainless steel hopper, Stator and screw, Electric 5 volt remote with 53' of cable, Provision for pneumatic control, Provision for vibrating screen, Pressure meter unit, Accessory box (cleaning tool, clean-out foam ball, tips), 1 gun of your choice
• Hooper capacity 12.5 Gallons
• Load height 25".
• 1-3/4 hp., 18 Amp 110 Volts motor.
• Stator screw RPM controlled by variable rheostat 8-140 RPM.
• Maximum pumping distance with 3/4" hose 50ft. with 1" hose 85 ft.
• Discharge head 50-60 ft. vertical lift.
• Weight 150lbs.
• Easy to use, easy to clean, it's a money making machine!
• An on board computer balances the spray rate with the pumping volume, this prevents clogging, an error message followed by a number will display to help you with the troubleshooting

Model	IMER Small 50
Hopper Cap.	12.5 gal.

Loading Height
25"
Motor
1.75 hp
Weight
150 lbs
Shipping FREE
Freight Truck