Caterpillar CEO Talks 2014 Outlook

Doug Oberhelman, CEO of Caterpillar, talks about the economic recovery, new technologies, Caterpillar's dealer model, and other issues at CONEXPO-CON/AGG 2014.

 

Caterpillar Mining: https://mining.cat.com/ 

Belle Group Minidumper

Categories

Tile Tools and Stone Tools
Tile Saws and Stone Saws
Tile and Stone Diamond Blades
Tile Cutters and Nippers
Jamb Saws and Toe Kick Saws
Diamond Hole Saws and Core Bits
Tile Grouting Tools
Polishing and Profiling Equipment
Grout Mixers
Concrete Tools and Masonry Tools
Concrete Saws and Masonry Saws
Diamond Blades
Concrete Mixers, Cement Mixers, and Mortar Mixers
Core Drill Equipment
Hammer Drills and Demolition Hammers
Surface Preparation Tools
Concrete Vibrators
Compaction Equipment
Power Screeds and Manual Screeds
Power Trowels
Generators
Air Compressors
Water Pumps
Angle Grinders


 

9165 Belle Group Minidumper BMD - $3,679.99 Features Free shipping from Belle Group warehouse Strong heavy duty design and tipping mechanism Can easily handle loads of up to 661 lbs Climbing ability of up to 38 degree inclines Usable in 2 or 4 wheel drive modes 28", ideal for small spaces Gear box with 4 forward gears Equipped with reverse gear and disc brakes 4 x 4 Multipurpose tires Engined positioned to allow easy access and service Equipped with parking disc brake for total operator security Center wheel engaging 4 wheel drive when loaded on rough terrain Perfectly balanced when working with full load Additional bearings to support axle and strengthening plate Bottom protection plate to avoid damage by stones Options Flat bed Ramps Belle Group Minidumper BMD 300 Motor 5.5 hp Travel Speed 3.72 mph Capacity 6.7 cu. ft Capacity 661 lbs Dimensions 28w x 36 h x 62 l Weight 341 lbs

Imer Wheelman II Gas Concrete Mixer

Categories

Tile Tools and Stone Tools
Tile Saws and Stone Saws
Tile and Stone Diamond Blades
Tile Cutters and Nippers
Jamb Saws and Toe Kick Saws
Diamond Hole Saws and Core Bits
Tile Grouting Tools
Polishing and Profiling Equipment
Grout Mixers
Concrete Tools and Masonry Tools
Concrete Saws and Masonry Saws
Diamond Blades
Concrete Mixers, Cement Mixers, and Mortar Mixers
Core Drill Equipment
Hammer Drills and Demolition Hammers
Surface Preparation Tools
Concrete Vibrators
Compaction Equipment
Power Screeds and Manual Screeds
Power Trowels
Generators
Air Compressors
Water Pumps
Angle Grinders

5993 Imer Wheelman II Gas Concrete Mixer - $925.00 IMER Wheelman II Portable Gas Concrete Mixer Free shipping from IMER factory warehouse Easy to clean poly drum. For the 2-3 person construction crew, there is no need to tow a mixer to the job site, not when the Wheelman II can make a wheelbarrow of concrete, mortar, stucco, grout, or dry pack mortar every 4 minutes! Speed

Mix 275lbs of mortar, stucco, grout and concrete in less than 4 minutes.

Gas Power

Working on a jobsite without electrical power, no problem, the Wheelman is available with a 3 h.p. Honda engine.

Direct drive gearbox - No belts to tighten, no bearings to grease, absolutely the most reliable drive system available today!

These mixers truly are Contractor duty!

Portablility

Easy to move around, construction duty 14" tires make the Wheelman a breeze to roll around the job site or home

In just a minute, the Minuteman or Wheelman can be "knocked down" into 3 easy to load components.

All this by one person, with no tools required!

Project-Mixing	Imer Product Application
Mixing Concrete (small batch-250lbs or less)	Minuteman or Wheelman
Mixing Concrete (large batch 400-800lbs)	Workman 250 or 350
Stucco (small batch-1 bag 80lbs or less)	Mini Mix 60
Stucco (medium batch-2 bag 80lbs)	Mortarman 120
Stucco (large batch 400lbs or more)	Workman 250 and 350
Mortar (small batch 80lbs or less)	Mini Mix 60
Mortar (small batch 160lbs-270lbs)	Mortarman 120 or Minuteman
Mortar (large batch 400lbs-800lbs)	Workman 250 or 350

Pramac Diesel Generator

9516 Pramac Soundproof GSW65 D 50kW Diesel Generator - $0.00 Pramac Soundproof GSW65 D 50kW Deutz Diesel Generator Water Cooled Suitable application is on construction sites, where durability and reliability are required to supply constant power to applications such as lighting, cranes, concrete mixers and conveyor belts. With low noise emissions, they are also suitable for open air activities, such as shows or sporting events. Excellent performance and easily installed they can be used either to support main electricity failure or in any location off the grid "not connected" to the main power supply. Quiet internal residential muffler. Set easy to be transported with hand pallet truck. Central lifting point. Complete with engine and battery liquids. Oil draining pipe with cap. High capacity fuel tank for longer work without fuel refilling. This soundproof version is outfitted with access doors to simplify maintenance and repair operations. Deutz engines extremely high load acceptance capacity ensures instant electricity supply. They respond quickly to load fluctuations. In addition, the application will not suffer from frequency deviations. Highly efficient alternators. Constant supply guaranteed by the electronic voltage regulator under any generator operating condition. Engine service points are accessible from one side. The maintenance is easier through large doors. Rated capacity battery for immediate engine start. Genset protection under/over voltage, overload, battery charger failure, battery voltage out of limits, Automatic control panel mounted under/over frequency, start failure. EPA tier II compliant. Automatic Panel features Selector switch with six positions: Automatic test - Automatic starting - Engine locked - Mains contactor forced Manual starting * - Genset contactor forced. *Manual Starting: the preheating period begins automatically when this position is selected. It is necessary to select again this position to enable one more time the preheating period. Push-buttons: start/stop, up/down selection, reset. Emergency stop button. Remote starting availability. Automatic battery charger. Instrumentation: Generating set voltage - Generating set frequency - Generator set current - Battery voltage - Hours-meter - Mains voltage. Pramac GBL42D 1 Phase 3 Phase Prime output 33.0 kVA 46.7 kVA Emergency output 34.8 kVA 49.1 kVA Diesel Engine Deutz BF4M 2011 AC voltage 1 Ø 240/120 V 3 Ø 208/120 V Fuel capacity 32 US gal 32 US gal Autonomy (75% load PRP) 14.8 Hrs 14.8 Hrs Fuel consumption (75% load) 2.11 (8.0) gal/h (l/h) 2.11 (8.0) gal/h (l/h) HP @ 1800 rpm 58 hp 58 hp Sound level at max.load (dB(A)at 23 ft) 71 dB(A) 71 dB(A) Operating weight 2,077 (948)lb (kg) 2,029 (940)lb (kg) Generator Length x width x height 88x43x51 (2,000x920x1.300)inch (mm) 88x43x51 (2,000x920x1.300)inch (mm)

Multipurpose Pumping, Spraying Mixing Machines

7695 Imer Small 50 Pumping, Spraying & Mixing Machines - $5,499.00 Imer Small 50 Multipurpose Pumping, Spraying Mixing Machines Free shipping from IMER factory warehouse Use with all types of finish coatings. Quickly and easily apply materials such as plasters, mortars, stucco (cement and synthetic based) fire proofing, sound proofing and paint. Pump grout to fill blocks, metal door bucks, self leveling materials, epoxy, almost any material with aggregate no bigger than 1/4".

The pump is controlled by the operator either with the 5 volt remote start/stop or, when used with the optional diaphragm compressor, is controlled with the open and closing of the valve at the gun. A rheostat controls the motor RPM which means that you have total control of the flow to match with the material being applied. All of the operation is controlled by the panel which can detect the wrong voltage and shut down as a safety. The unit will sense a jamb and cut the power to the pump. Thermal overloads are in place on the 100% duty cycle motor. This means that the motor can run all day, every day. The control panel will sense an overload before the thermal protection on the motor. This is just the level of how safe, secure and sophisticated this machine is.The optional compressor is needed when used for spraying applications. The oil-less, continuous flow, low PSI high CFM compressor is the lungs of the unit. The pumping action is all on the operator. With the air valve closed the compressor senses back pressure and turns off the compressor and the pump motor. When the valve is re-opened the compressor and the pump kick on again to start where you left off.There are 2 different nozzles for spraying. One is for heavy materials that needs to be built up such as fire proofing materials and mortars. The other nozzle is used for spraying of thinner coats such as acrylic stucco and coatings. This nozzle comes with different orifice sizes and when used without the compressor, makes a great tool for pointing, filling in cracks and joints in between stone walls.Small 50 Features.

• Stainless steel hopper, Stator and screw, Electric 5 volt remote with 53' of cable, Provision for pneumatic control, Provision for vibrating screen, Pressure meter unit, Accessory box (cleaning tool, clean-out foam ball, tips), 1 gun of your choice
• Hooper capacity 12.5 Gallons
• Load height 25".
• 1-3/4 hp., 18 Amp 110 Volts motor.
• Stator screw RPM controlled by variable rheostat 8-140 RPM.
• Maximum pumping distance with 3/4" hose 50ft. with 1" hose 85 ft.
• Discharge head 50-60 ft. vertical lift.
• Weight 150lbs.
• Easy to use, easy to clean, it's a money making machine!
• An on board computer balances the spray rate with the pumping volume, this prevents clogging, an error message followed by a number will display to help you with the troubleshooting

Model	IMER Small 50
Hopper Cap.	12.5 gal.

Loading Height
25"
Motor
1.75 hp
Weight
150 lbs
Shipping FREE
Freight Truck

Wacker GP6600A Premium Portable Generator Portable Generator

9355 Wacker GP 6600A Portable Generator - $2,179.99 Wacker GP6600A Premium Portable Generator Portable GeneratorRugged and powerful generators for the most demanding jobsites Designed for construction rental and other demanding applications, these high performance, portable generators deliver unmatched tool starting and voltage regulation in a rugged, compact package. Built the WACKER way, with heavy-duty frames and premium components to provide long, trouble-free operation even in abusive environments. Ideal for powering high starting amperage tools such as compressors, grinders, fusion welders, saws, pressure washers as well as all of your WACKER electric- powered pumps, breakers, drills, concrete vibrators, etc.Wacker GP 6600A Features:

• Best in class tool starting and voltage regulation due to unique step-start generator technology with AVR (automatic voltage regulation) and separate excitation winding.
• Full wrap-around frame with dual cross-member support, high impact polyethylene fuel tank and heavy duty shock-mounting combine to provide outstanding impact protection.
• A super quiet muffler allows for versatile operation.
• Full wrap-around frame with dual cross-member support, high impact polyethylene fuel tank and heavy duty shock-mounting combine to provide outstanding impact protection.
• Unique auto-idle control with time delay system automatically reduces the engine to a low speed reducing fuel consumption, noise and wear.
• Available with the high performance WACKER OHC engine (on GP2600 and GP4000) or Honda OHV engine, both feature low oil shutdown.
• Full 120V power switch for maximum 120V or 120V/240V power, ideal for a wide variety of applications.
• Unique GFCI (neutral bonded to ground) sensor system eliminates common GFI outlet failures while offering personal protection on all receptacles including 240 Volt. Meets the latest NEC and OSHA jobsite standards.

Technical Features

Description	Metric		Imperial
Length x width x height	685 x 530 x 520	mm	27 x 21 x 20.5	in
Dry Weight	87	kg	192	lb
Shipping size	710 x 545 x 570	mm	28.5 x 21.5 x 22.5	in
Shipping weight (including packaging)	89	kg	197	lb
Maximum output	6.000	W	6,000	W
Continuous output	6,0	kVA	6.0	kVA
Continuous AC amps	50,0/25,0	A	50,0/25,0	A
Voltage A.C.	120/240	V	120/240	V
A.C. circuit breaker amps	27, 2 pole	A	27, 2 pole	A
Frequency	60	Hz	60	Hz
Phase	1	~	1	~
Power factor (1 phs / 3 phs)	1,0		1.0
Engine Type	Honda
Starting system	recoil
Displacement	389	cm3	23.7	in3
Max. power output according to DIN-ISO 3046	9,7	kW	13	hp
Operating speed	3.600	1/min	3,600	rpm
Fuel tank capacity	19,5	l	5.2	US gal
Running time/full load	5	h	5	h
AC outlet receptacles	2-125V, 20 A Duplex ,1-125V, 30 A Twist Lock; 1-125/250V, 30 A Twist Lock		2-125V, 20 A Duplex ,1-125V, 30 A Twist Lock; 1-125/250V, 30 A Twist Lock

Mk ATS Saw Stand

156426 MK ATS Saw Stand - $529.00 Mk ATS Saw Stand Versatile and highly mobile saw stand with zinc-plated square steel tubing 10" pneumatic tires, and removable side table Tile saw not included.