Wacker Diaphragm Trash Pump

Categories

Tile Tools and Stone Tools
Tile Saws and Stone Saws
Tile and Stone Diamond Blades
Tile Cutters and Nippers
Jamb Saws and Toe Kick Saws
Diamond Hole Saws and Core Bits
Tile Grouting Tools
Polishing and Profiling Equipment
Grout Mixers
Concrete Tools and Masonry Tools
Concrete Saws and Masonry Saws
Diamond Blades
Concrete Mixers, Cement Mixers, and Mortar Mixers
Core Drill Equipment
Hammer Drills and Demolition Hammers
Surface Preparation Tools
Concrete Vibrators
Compaction Equipment
Power Screeds and Manual Screeds
Power Trowels
Generators
Air Compressors
Water Pumps
Angle Grinders


 

9364 Wacker PDT 3A 3in Diaphragm Trash Pump - $1,910.99 Wacker PDT3A 3in Diaphragm Trash PumpDiaphragm trash pumps for jobs no other pumps can handle WACKER's diaphragm trash pumps can move anything that flows. Built with high quality components, you will be assured of many years of top performance and durability. Designed to handle solids up to 1-3/4" (45mm), ideal for dewatering mud slurries and seepage areas.Features and benefits Aluminum alloy body with heavy-duty pump diaphragm provides a lightweight, reduced maintenance package that ensures long life. Surge chamber on inlet side results in smooth pumping operation by absorbing pressure spikes while reducing wear. Oil bath lubricated transmission ensures continuous lubrication to all parts of the gear transmission system, reducing both maintenance costs and lost production time.

Hardened forged gears extend pump life and provide efficient power transmission from the engine to the pump.

Straight through water flow design provides high production pump capacity and less down time blockages.

Technical features

Description	Metric		Inch
Suction & discharge diameter	75	mm	3	in
Length x width x height	990 x 760 x 635	mm	39 x 30 x 25	in
Operating weight	63	kg	138	lb
Max. discharge head	7,5	m	25	ft
Max. discharge	333	l/min	88	US gpm
Max. suction lift	7,5	m	25	ft
Solid size capacity	45	mm	1.75	in
Engine Type	air-cooled, 4-cycle, single cylinder, Honda gasoline engine
Displacement	118	cm3	7.2	in3
Max. power output according to DIN-ISO 3046	3,0	kW	4.0	hp
Operating speed	3.000	1/min	3,000	rpm
Fuel capacity	2,5	l	2.6	US qt
Max fuel consumption	1,1	l/h	1.2	US qt/h

Wacker PG 2A 2in Centrifugal Dewatering Pump

9358 Wacker PG 2A 2in Centrifugal Dewatering Pump - $489.99 Wacker PG 2A 2in Centrifugal Dewatering PumpCentrifugal dewatering pumps are the value alternative for keeping jobsites dry. WACKER's PG dewatering pump series has been designed to handle the removal of relatively clean jobsite water. With its self-priming centrifugal pumping action and overall compact size, the pump is ideal for the contractor with the need for temporary water removal.Features and benefits Cast iron impeller and volute are wear resistant for long life and minimal service. Pump out vanes on back of impeller reduce debris accumulation and downtime while allowing greater productivity. Carbon ceramic mechanical seal teamed with reliable four-cycle engine with low oil shutdown provides for increased operating life.

High strength lightweight diecast aluminum housing increases the years of trouble-free pump life.

A heavy-duty protective frame provides convenient carry handles while adding extra protection for the pump.

Self-priming high performance pump capable of handling solids up to .25 inch (6,5mm), ideal for jobsites with relatively clean waters.

Technical features

Description	Metric		Inch
Suction & discharge diameter	50	mm	2	in
Length x width x height	480 x 375 x 395	mm	19 x 15 x 15.5	in
Operating weight	24	kg	53	lb
Max. head	30	m	98	ft
Max. discharge	600	l/min	159	US gpm
Max. suction lift	7,5	m	25	ft
Solid size capacity	6,5	mm	.25	in
Engine Type	air-cooled, 4-cycle, single cylinder, gasoline engine Honda
Displacement	118	cm3	7.2	in3
Max. power output	3,0	kW	4	hp
at	3.600	1/min	3,600	rpm
Operating power	2,7	kW	3.6	hp
at	3.600	1/min	3,600	rpm
Fuel tank capacity	2,5	l	2.6	US qt
Fuel consumption	1,3	l/h	1.4	US qt/h