Giuelith Timantti - Industrial Equipment: tool

Showing posts with label tool. Show all posts

Friday, June 7, 2013

7697 Imer Small 50 Compressor - $1,599.00
Diaphragm compressor

2 Pcs 53' of air hose Ã˜ 1/2" with couplings.

The accessory compressor delivers high volume output with low pressure.

This ensures complete and even material application when spraying.

Compressor is needed to allow for spraying of materials

Eccentric design with 60% more power for high productivity and ease of use.
Wrap-around frame design provides greater strength and better isolation.
Patented magnesium blades cur and roll the concrete in front of the screed, reducing the need for grading while the ten inch wide shoe promotes flatter floors.
Available with blades form 4 ft to 14 ft for one man operation and 16 ft to 22 ft for two man operation.
31cc. 4 cycle Honda gasoline engine power a well engineered and field proven eccentric system to frequencies up to 6000 Vpm.
This system is mounted on an angle to the blade, allowing the vibration to be transmitted both horizontally and vertically.
The combination of high frequency combined with the angled eccentric system design promotes smoothness and rapid consolidation of the mix.
Large rubber shock mounts direct vibrations away from the operator and down into the mix.
A strong, light weight frame allows the blades to be changed in seconds while the pull handles adjusts quickly to the operators height for optimum productivity.
Power unit and frame weigh in at only 28 lbs making the system easy to maneuver and transport around the site.
Max bar length 12 ft. per power unit.
10 ft to 22 ft bars ships by truck freight.

7827 Wacker BH 24 Gas Concrete Breaker with Cart Point and Chisel - $3,450.00
Wacker BH24 with cart point and chiselThis 57 lb demolition machine tops its class in smash, delivering 1,250 blows per minute measuring 65 joules each.

Gasoline Breaker brings reliability and high-performance to any job site
This breaker is ideally suited for breaking concrete floors, walls, sidewalks, stones, brickwork, frozen ground, heavy clay and similar materials; cutting and breaking asphalt pavements, driving posts, soil probes, ground rods, stakes and tamping small backfill areas.
Large oversize fuel tank reduces refueling and provides for long run time
The centrally located grease nipple makes maintenance easy, as it allows the complete machine to be greased on the job site with a small grease pump
The proven EPA-certified WACKER two-cycle gasoline engine, specifically designed for tough and rugged applications, is a powerful, low exhaust emission engine offering long service life.
The breaker is ideally suited for breaking concrete floors, walls, sidewalks, stones, brickwork, frozen ground, heavy clay, and similar materials
Power Train from engine via centrifugal clutch, crank mechanism and air-cushion percussion system to tool.
To reduce the shudder to the operator's body, the gas-powered hammer uses a spring-mounted hood and a rocker bar to absorb about a third of the shock force running from the steel chisel to the handles.

Technical Data BH 24

Description	Metric		Inch
Length x width x height	960x450x333	mm	37.8x17.7x13.1	in
Shipping size (l x w x h)	980x470x360	mm	38.6x18.5x14.2	in
Shank	hex 28 x 152	mm	hex 1.1 x 6.0	in
Weight without tool	26,0	kg	57.3	lb
Single stroke impact	65 (6,5)	J (mkp)	47.9	ft lb/blow
Percussion rate	1.250	1/min	1.250	blows/min
Sound pressure level	108,5	dB(A)	108,5	dB(A)
Drive engine	air-cooled 2-stroke petrol engine
Displacement	80	cm³	4.9	in³
Rated power output	2,0	kW	2.7	hp
at	4.100	1/min	4.100	rpm
Fuel type	petrol-oil mixture 50 : 1
Fuel consumption	0,9	l/h	1.0	US qt/h
Tank capacity	2,1	l	2.2	US qt

8026 Diteq Blu-Drill RH1531 Hand Held Core Drill - $1,213.00
Diteq Blu-Drill RH1531 Hand Held Core Drill. RH1531 Advantages.

Ideal for concrete and masonry drilling applications.
3-speed gearbox with selector adjusts for various bit sizes (560/1400/2900 Rpm).
On/off switch for column mount
Powerful 15 Amp motor comes with carrying case.
Weight only 15 lbs. 3 speed operation.
D-style handle for ergonomic control.
Two conveniently placed leveling gauges and multi-position removable side handle.
Standard 1-1/4"-7 thread with 5/8"-11 threaded adapter and water connection.
Equally suited for wet or dry drilling.
Clutch design patent pending.